CONFIG_MAX30101_LED1_PA:

Set the pulse amplitude to control the LED1 (red) current. The actual measured LED current for each part can vary significantly due to the trimming methodology. 0x00 = 0.0 mA 0x01 = 0.2 mA 0x02 = 0.4 mA 0x0f = 3.1 mA 0xff = 50.0 mA

Symbol:

MAX30101_LED1_PA

Type:

hex

Value:

“”

User value:

(no user value)

Visibility:

“n”

Is choice item:

false

Is defined:

true

Is from env.:

false

Is special:

false

Ranges:

• [0, 0xff]

Prompts:

• “LED1 (red) pulse amplitude”

Default values:

• 0xff (value: “n”)
• Condition: (none)

Selects:

(no selects)

Reverse (select-related) dependencies:  

(no reverse dependencies)

Additional dependencies from enclosing menus and ifs:  

MAX30101 (value: “n”)

Locations:

• ../drivers/sensor/max30101/Kconfig:112